Installing the Driver: PCI

Use this procedure to install Microsoft Windows XP device drivers for Digi PCI adapters. 

Procedure

1. Install the adapter according to the instructions on the hardware installation card for that adapter.

   Note: When you install multiple PCI adapters of the same type on a Windows system, it is sometimes difficult to determine which adapter you are configuring. To avoid confusion, you may wish to install and configure the adapters one at a time.

2. Turn on the computer and start Windows XP. Windows will auto-detect the adapter and search for the correct device driver. 
3. If Windows cannot find a driver for the adapter, you will be asked for the location of the driver. If the driver is on a Digi-supplied CD, check the CD-ROM box. If you have downloaded the driver, enter the path to the folder into which you downloaded the driver.
4. Depending on your adapter type, you may be asked to complete various configuration wizards or dialogs. These wizards and dialogs are fully documented in context-sensitive help screens.
5. When the installation is complete, the device is ready to use. There is no need to restart Windows.