Use this process to configure a SYNC 2000 line for IP traffic over a frame relay link.
Gather information for configuration. See Information to Gather: Frame Relay Configuration.
Ensure that the SCO patches have been installed. See Required SCO Patches.
Understand key concepts. These include the following:
PVCs and IP Addresses. See About PVCs and IP Addresses.
RFC 1490 Encapsulation. See About RFC 1490 Encapsulation.
Install the Digi adapter. See the hardware installation card.
Install the Digi driver. See Installing the Driver: CD.
Add a WAN device. See Adding a WAN Device
Configure general frame relay parameters. See Configuring a Line: General Frame Relay.
Configure IP-specific parameters. See Configuring a Frame Relay Connection: IP.