Configuring X.25 Virtual Circuits

Use this procedure to configure X.25 virtual circuits.

Procedure

1. From the Internetworking Configuration menu, choose WAN Call Directory.

   The Configured WAN Call Destination screen appears.

2. Press the Ins key.

3. Choose X.25-HOST as the Supported Wide Area Medium.

   The X.25 Call Destination Configuration screen appears.

4. Specify the following:

   • The Call Type

   • The interface for the call

   • A PVC number for PVC connections or a destination DTE address for SVCs

   • Changes to other parameters as required.