Use the display command to display serial activities and error messages.
Enter the display command as shown below:
display {port [range=range]} | {error
[clear]}
|
Command Field |
Description |
|
port |
Displays the serial port activity of one or more ports. If no range is specified, displays activity for all ports. If a range is specified, displays activity for specified port or ports. |
| range | Specifies a range of ports to display. |
| error |
Displays the last 10 error messages. Specify error clear to clear the error list. Note: This function is not supported by Digi One RealPort or PortServer TS 2/4. |
In this example, the display command displays information about ports 4-8:
display port range=4-8