Use the set device command to:
Configure modems and other devices used for outgoing connections to use dialer scripts and chat table entries
Configure a different baud rate (line speed) for modems and other devices used for outgoing connections than the rate defined on the set line command
Remove an entry from the device table
Display the contents of the device table
Anyone can display the contents of the device table. Root privileges are required to configure devices.
Also see the set chat, set line, and set script commands.
Enter the set device command as shown below to configure entries in the device table:
set device name=name [baud={no|rate}] [chat={no|index_num|chat_name}] [dialer={no|index_num|script_name}] [ports=range] [newname=newname] [p{1-9}]
Enter the set device command as shown below to remove an entry from the device table:
set device rmdevice=on {range=index_range|device=name}
Enter the set device command as shown below to display entries from the device table:
set device show=on [{range=range|name=name}]
|
Command Field |
Description |
|
baud |
no - means the baud rate specified on the set line command will be used. rate - the baud rate (line speed) when this device is used. This field overrides the baud rate (for this device) defined on the set line command. The range is 50 to 460,800 bps, and the default is no. |
|
chat |
no - means that a chat table entry is not associated with this device. index_num - a chat table entry (index number) associated with this device. chat_name - the name of a chat table entry. The default is no. |
|
dialer |
no - means that a dialer script is not associated with this device. index_num - a script table entry (index number) associated with this device. script_name - the name of a script The default is no. |
|
name |
Specifies a user-defined name for the device. |
|
newname |
Specifies a new name for a previously defined device. |
|
p{1-9} |
Integers (1-9) that can be used in the variable fields of login or dialer scripts. |
|
ports |
Specifies the port or range of ports available to this device. |
|
range |
Specifies a device table entry or range of entries (identified by their index numbers). |
|
rmdevice=on |
Removes the device specifies on this field and on the range field. |
| show=on | Displays detailed information on the settings for the specified device. |
In this example, the set device command displays the entire device table.
set device
In this example, the set device command displays a range of entries in the device table.
set device range=4-7
In this example, the set device command removes an entry from the device table.
set device rmdevice=on range=2
In this example, the set device command configures a device to use a dialer script and to override the baud rate specified on the set line command.
set device name=OutDev ports=3-5 dialer=modemscp baud=19200