Master Setup Process

Use this topic to identify all the tasks required to complete RealPort setup.

Procedure

1. Install and configure the RealPort driver. See Installing the Driver: CD or Installing a Driver: Download.
2. Configure the Digi One RealPort or PortServer for RealPort. This step is not required for Etherlite units. 

   See Configuring the Digi One RealPort and PortServer for RealPort. 

3. Reboot the system to make RealPort ports available to the operating system.
4. Configure peripherals on the RealPort ports. See the following: Configuring a Printer on a Digi Port and Configuring a Modem on a Digi Port.