Installing the Driver: Downloaded

Use this procedure to install a driver that you have downloaded from the Digi Support Web site (http://supportold.digi.com).

Note: If you are installing multiple adapters, each adapter needs to be installed separately. You need to restart your computer before installing another adapter.

Procedure

1. Log on to Windows NT as Administrator.
2. From Start, choose Settings > Control Panel > Network > Adapters.
3. Do one of the following:
   • If this is the first time you have installed this driver, choose Add > Have Disk.
   • If you have installed an earlier version of this driver, choose Update.
4. Enter the path to where the driver is stored and then choose OK.
5. Choose the driver and then OK.
6. Choose OK on the Setup screen to complete installation.

   The adapter appears on the Network Adapters list.

7. Choose Close and restart the computer.