Use the connect command to initiate a local connection on a selected port. Anyone can issue the connect command.
To temporarily suspend a connect session, use the escape key defined by the ConnectEsc option of the set user command (default for root is CTRL-[). Use the close command to end the session.
Enter the connect command as shown below:
connect {[serial_port] | [id_name] |
[hunt_group]}
|
Command Field |
Description |
|
serial_port |
Specifies the number of the port on which to establish a connection. |
| id_name |
Specifies the name of the port on which to establish a connection. See the set ports id=id_name command. Note: The name parameter is not supported on Digi One RealPort or PortServer TS 2/4 modules. |
| hunt_group |
Specifies a hunt group, defined with the set ports group command. Note: The hunt group parameter is not supported on Digi One RealPort or PortServer TS 2/4 modules. |
In this example, the connect command opens a local connection on port 8:
connect 8