Procedure for Using a Host File

Use this procedure to manually configure the host table, which the Digi devices use to map IP addresses to host names.

Procedure

Issue a set host command for each host that you want included in the host table. Specify the following:

• The name of a host on the name field
• The IP address for the host on the ip field

Example

In this example, three set host commands provide IP address-to-domain name mappings for three hosts.

set host name=poe ip=204.221.110.201
set host name=gary ip=204.221.110.202
set host name=toni ip=204.221.110.203