Uninstalling RealPort

Introduction

The Digi device driver software can be removed from the kernel by using custom. The Development Kit is not required, although the link kit must be installed.

Uninstall Procedure

1. Log onto the console as super-user (root), and enter this command: custom
2. Choose Software > Remove from the menu that appears.
3. Choose the Digi One RealPort or PortServer driver.

   When prompted to remove Digi One RealPort or PortServer entries from /etc/ttytype, enter <y> to remove the entries. Enter <n> to preserve the entries.

   When prompted to boot the new kernel by default, enter <y> for the new kernel to boot by default. Enter <n> if there is a specific reason for this new kernel not to boot by default.

   When prompted to rebuild the kernel environment, enter <y>.

4. Exit custom.
5. Enter the following command to shut the system down and boot the new kernel:

   shutdown -y -g0