About This Guide

Purpose

Use this guide for the following: 

• An introduction to your Digi product, how to install, configure and use the Digi product and, if applicable, how to troubleshoot should you encounter a problem
• Configuration examples, where appropriate
• Administration procedures, where applicable

Audience

This manual is intended for the person responsible for configuring and administering a Digi adapter or system. This person should have experience configuring network devices and be familiar with networking concepts.

Conventions

Following are the conventions used in this document:

• Special fonts
  • A special font is used for any input you need to enter. For example,

    mkpconn

  • Optional parameters will be displayed within square brackets. For example,

    ditty [-a] [altpin]

    The square brackets themselves are not actually part of the command, and should not be entered.

  • Variables will be displayed in italics. For example, 

    stty-digi ttyname

    Substitute an appropriate TTY name for ttyname in the above command.

  • A vertical bar character (|) is used to denote a choice (logical "or"). For example,

    set flow=on|off

    The above command would be entered as either

    set flow=on or set flow=off. 

• Keys and titles of dialog boxes, indexes, menu bars, windows, etc. appear exactly how they appear on the keyboard or on the screen.
• The word, Choose, can mean Click, Point, Select, Hit, Press and so on.