Installing the Driver

Use this procedure to install the RealPort driver for Novell NetWare on your server. You must perform this procedure from the NetWare System Console.

Procedure

1. Place the CD in the CD-ROM drive.
2. Ensure that cdrom.nlm is loaded by entering the command load cdrom.
3. If you are on a Novell NetWare 4.1 system, mount the CD-ROM drive by entering the command cd mount digi_cd. (Novell NetWare 5.0 systems mount CD-ROM drives automatically.)
4. Enter the command load netbasic.
5. Enter the command type shell.
6. Enter the command copy digi_cd:\drivers\netware\aio*.* sys:\system\