Master Setup Process

Use this topic to identify all the tasks required to complete RealPort setup.

Procedure

1. Install and configure the RealPort driver. See Installing a Driver. If you are upgrading an installed driver to a newer version, see Upgrading the Driver.
2. Configure the Digi One RealPort or PortServer for RealPort.  This step is not required if you have an Etherlite module. 

   See Configuring the Digi One RealPort or PortServer for RealPort. 

3. Reboot the system to make RealPort ports available to the operating system.
4. Configure peripherals on the RealPort ports. See the following: Configuring a Printer on a Digi Port and Configuring a Modem on a Digi Port.