Adding a Digi Device

Use this procedure to add a Digi device to your Linux System.

1. Access Digi RealPort Manager by entering this command at a Linux prompt:

   /usr/bin/dgrp/config/dgrp_gui

   Note: Digi will only support use of the GUI with the wish interpreter. The wish tcl interpreter needs to be in the Linux "path" before the dgrp_gui command will work.

2. There are two ways to register a new Digi device with the RealPort package. Either press the Add button that appears at the bottom of the main screen, or choose the PortServer > Add New from the menu. In either case, the Digi device Settings window will appear.
3. Specify values for each of the fields displayed (some of the fields have defaults).
4. Press the Commit button and the RealPort Command Logger window will appear and an appropriate dgrp_cfg_node command will be displayed.
5. Press the Run It button to execute the command and finish adding and initializing your Digi device. Watch for any errors in the log window.