With the ditty command, display options such as flow control settings, speed and transparent print settings can be configured for your RealPort TTY devices. For detailed information on the ditty command, refer to the Solaris man pages and Setting TTY Options.
Note: To use the man pages for the first time, the path /usr/share/man must be added to the system MANPATH. Here is an example of such a command that is sufficient in most cases. At a root prompt on the system, enter:
MANPATH=$MANPATH:/usr/share/man.
ditty commands should be manually inserted in the startup file /etc/rc2.d/S99ditty (or any other file beginning with "S99" in the same directory) so they are executed every time the system boots.