Uninstalling RealPort

Use this procedure to uninstall the AIX RealPort driver.

Procedure

1. Log onto the system as superuser (root).

2. Disable login on any RealPort TTY device with a login enabled on it.

3. Kill any processes open on any RealPort TTY or lp device.

4. Determine the PortServer sa device(s). At the command prompt, enter:

smit devices 

and choose Digi PortServers.

6. Use the rmdev command to remove all the RealPort sa TTY, and lp devices.
   
   rmdev -l [sa device] -R -d
   
   Note: The -R option, when used to remove an sa device, will delete the sa device specified and all the TTY and lp devices assigned to it. This is useful if there are many RealPort devices to remove from the system. If you wish to remove individual TTY and lp devices with the rmdev command, the -R option should not be used.

7. Enter the command: 

smit install_remove

A dialog panel appears.

8. Alter the field SOFTWARE name to: 

digiasync.ncxa.obj

9. Alter the field PREVIEW only to: 

no

10. Choose OK.
    
    This prompt appears: Are You Sure?

11. Choose OK.
    
    The uninstallation should proceed to a successful conclusion.