Checking LED Indicators: OFC On?

Use this procedure when an OFC indicator light is on on the PortServer.

Note: This Procedure only works with a PortServer and not a PortServer II. PortServer II users should choose Back to return and continue with the Master Troubleshooting Process.

Procedure

  1. From a terminal attached to the port, enter:

    2. Ctrl-Q 

  2. From the PortServer, enter:

    3. kill tty=port number

    where port number is the number assigned to the PortServer.

  3. If OFC is still on, enter the following at the PortServer command line prompt:

who

If the Connected from column shows other items such as IP address, make sure that the originating system process is disabled.

If in either case, the lights are still on, choose Back to return and continue with the Master Troubleshooting Process.