Configuring a Device with admintool

The Solaris system administration utility, admintool, can be used to configure Digi serial devices.

Note: In order to use admintool, The Digi devices need to be linked to devices in /dev/term and /dev/cua.  These links are normally created when the driver is installed.  If these links are not there they can be created manually. See the man pages on the command ln for more information on creating links.

Procedure

1. Access admintool through a window interface, or entering this command at a root prompt:

   admintool

2. From the admintool window, select Browse > Serial Ports.
3. Choose a device.
4. Choose Edit > Modify.
5. Configure the port as needed.