STANDARD EIA-232 DIGI CABLES
TERMINAL/PRINTER CABLES (DIGI ADAPTER to TERMINAL/PRINTER/DTE)
DIGI TERMINAL/PRINTER |DIGI ADAPTER TERMINAL/PRINTER
RJ-45 DB-25 |RJ45 DB-25 DB-25
8pin |10pin
|
PIN SIGNAL - PIN SIGNAL |PIN PIN SIGNAL - PIN SIGNAL
|
1 DCD* --- 4 RTS | 3 4 RTS --- 5 CTS
2 RTS --- 5 CTS | 4 Shell GND --- Shell GND
3 GND --- Shell GND | 5 2 TxD --- 3 RxD
4 TxD --- 3 RxD | 6 3 RxD --- 2 TxD
5 RxD --- 2 TxD | 7 7 SG --- 7 SG
6 SG --- 7 SG | 8 5 CTS --- 20 DTR**
7 CTS --- 20 DTR** | 9 20 DTR --- 8 DCD
| ^- &6 &DSR***
8 DTR --- 8 DCD |10 8 DCD* -v
^- &6 DSR** |&2 &6 DSR --- 4 RTS
* ALTPIN must be turned ON with Digi RJ45-8pin
and OFF with Digi DB-25 or RJ45-10pin.
** Okidata Printers may use SSD (pin 11) instead. If wired for SSD they
should be set for SSD+
*** Some printers require DSR. It should either be wired or the
printer set to DSR Invalid.
MODEM CABLES (DIGI ADAPTER to MODEM/DCE)
DIGI ADAPTER MODEM/DCE |DIGI ADAPTER MODEM/DCE
RJ-45 DB-25 |RJ45 DB-25 DB-25
8pin |10pin
|
PIN SIGNAL - PIN SIGNAL |PIN PIN SIGNAL - PIN SIGNAL
|
1 DCD* -- 8 DCD |10 8 DCD* -- 8 DCD
2 RTS --- 4 RTS | 3 4 RTS --- 4 RTS
3 GND --- Shell GND | 4 Shell GND --- Shell GND
4 TxD --- 2 TxD | 5 2 TxD --- 2 TxD
5 RxD --- 3 RxD | 6 3 RxD --- 3 RxD
6 SG --- 7 SG | 7 7 SG --- 7 SG
7 CTS --- 5 CTS | 8 5 CTS --- 5 CTS
8 DTR --- 20 DTR | 9 20 DTR --- 20 DTR
| 2 6 DSR --- 6 DSR
| 1 22 RI --- 22 RI
* ALTPIN must be turned ON with Digi RJ45-8pin
and OFF with Digi DB-25 or RJ45-10pin.
NT RAS Requires RJ45-10 pin or DB 25 Cable
Revised 09/01/99: BT
