<< Previous | Next >>

LD (pd+HL),JKHL     Load     Rabbit 4000/5000 Instruction

Opcode	Instruction	Operation
--	LD (pd+HL),JKHL	(pd+HL) = L; (pd+HL+1) = H (pd+HL+2) = JKlow (pd+HL+3) = JKhigh
FD 0D	LD (PW+HL),JKHL	(PW+HL) = L; (PW+HL+1) = H (PW+HL+2) = JKlow (PW+HL+3) = JKhigh
FD 1D	LD (PX+HL),JKHL	(PX+HL) = L; (PX+HL+1) = H (PX+HL+2) = JKlow (PX+HL+3) = JKhigh
FD 2D	LD (PY+HL),JKHL	(PY+HL) = L; (PY+HL+1) = H (PY+HL+2) = JKlow (PY+HL+3) = JKhigh
FD 3D	LD (PZ+HL),JKHL	(PZ+HL) = L; (PZ+HL+1) = H (PZ+HL+2) = JKlow (PZ+HL+3) = JKhigh

Clocks	8-Bit Access	16-Bit Unaligned	16-Bit Aligned
Rabbit 4000	18	n/a	n/a
Rabbit 5000	19	19	17

Flags				ALTD			IOI/IOE
S	Z	L/V	C	F	R	SP	S	D
-	-	-	-

Description

Loads the memory location whose address is computed as the sum of pd and HL with JKHL. HL is considered sign extended to 24 bits.

The address is treated either as a logical address that will be passed through the MMU for translation into a physical address or as a physical address that does not need MMU translation.

If pd is 0xFFFFxxxx, i.e., the upper 16 bits are all ones, it represents a logical address. This is called a "long logical" address. Otherwise, it is a physical address with the low 20 bits or 24 bits being significant (depending on the memory available).