<< Previous | Next >>

CP (HL)     Compare     Rabbit 2000/3000/3000A Instruction

Opcode	Instruction	Operation
BE	CP (HL)	A - (HL)

Clocks	8-Bit Access	16-Bit Unaligned	16-Bit Aligned
Rabbit 2000/3000	5	n/a	n/a

Flags				ALTD			IOI/IOE
S	Z	L/V	C	F	R	SP	S	D
·	·	V	·	·			·

Description

Compares A with the data whose address is in HL.

These compares are accomplished by subtracting the data from A. (This operation does not affect A.) The result is:

A < x : S=1, C=1, Z=0, L/V=V
A = x : S=0, C=0, Z=1, L/V=V
A > x : S=0, C=0, Z=0, L/V=V

where "x" is the addressed data and "V" indicates that the overflow flag is set on an arithmetic overflow result. That is, the overflow flag is set when the operands have different signs and the sign of the result is different from the argument you are subtracting from (A in this case). For example, the overflow flag will be set if A contains 0x80 and you're comparing it to 0x01. The result of the subtraction is 0x7F, which has a different sign than 0x800.

The opcode for this instruction is different than the same instruction in the Rabbit 4000 and 5000.