Master Setup Process

These are the steps necessary for the installation and configuration of RealPort.

1. Read any release notes that may be included with the installation media. Also read the Requirements and Considerations topic.
2. Gather information necessary for installation. See Information to Gather.
3. Configure the Digi One RealPort or PortServer for RealPort. See Configuring a Digi One RealPort or PortServer for RealPort.
4. Install the Digi One RealPort or RealPort driver. See Installing the Driver: CD.
5. Add the Digi One RealPort or PortServer with smit. See Adding a Digi One RealPort or PortServer with smit.
6. Configure the Digi One RealPort or PortServer with smit. See Configuring a Digi One RealPort or PortServer with smit.
7. Configure the TTY Devices as necessary. See the TTY configuration topics under Setup in the table of contents.