Master Setup Process

These are the steps necessary for the installation and configuration of RealPort.

1. Read any release notes that may be included with the installation media.
2. Gather information necessary for installation. See Information to Gather.
3. Configure the Digi One RealPort or PortServer for RealPort. See Configuring a Digi One RealPort or PortServer for RealPort.
4. Install the RealPort driver. See Driver Installation:  CD or Driver Installation: Downloaded.
5. Follow the procedure Adding a Digi One RealPort or PortServer with drpadmin.
6. Configure the TTY Devices as necessary. See the TTY configuration topics under Setup in the RealPort for HP-UX main Table of Contents.