Index

: 10Base-5 Ethernet

cable and connectors
connecting MAX 800 to
: 10Base-T Ethernet

cable and connectors
connecting MAX 800 to
port used
status light

A

accessories

Ascend Documentation Library CD-ROM

languages

AUI port

cable and connectors required
location on MAX 800
purpose
usage

B

back panel, identifying components of

C

cable

connecting 10Base-5 to MAX 800
connecting 10Base-T to MAX 800
straight-through for control port

control port

cable and connectors required
location
purpose
straight-through cable

D

Default Security profile

diagnostic tests. See Power-On Self Test

DO command menu (VT100 interface)

documentation

NavisConnect

E

error indicators

Ethernet cable requirements

F

front panel, identifying components of

Full Access Security profile

default password
using NavisConnect to change default password

I

indicator lights. See lights

IntragyAccess CD-ROM

IP address assignment using NavisConnect

ISDN BRI adapters. See PCMCIA cards

L

lights

indicating configuration problems
interpreting
Link status light
location of
monitoring Ascend PCMCIA card ISDN adapters, for
monitoring PCMCIA card modems, for
network traffic indicator
power light
power status
Type III PCMCIA card (ISDN)

Link status light

location
purpose

location of MAX 800 unit, selecting

M

MAX Companion CD-ROM

modem

problems, troubleshooting
using unapproved

mounting MAX 800 in rack mounts

N

NavisConnect

changing default Full Access Security password
changing Default Security profile
documentation of
hardware and software requirements
how it works
installing
location on PC
operating systems supported by
purpose
starting
where to find

network connectivity, establishing

P

passwords

administrative user
Full Access Security profile
SNMP
Telnet access

PCMCIA cards

Ascend ISDN adapters
description of
differences between types
inserting
location of approved modem list
maximum supported
modems
purpose in MAX 800
troubleshooting
Type I
Type II
Type III

POST. See Power-On Self Test

power cables

connecting to MAX 800
types supplied

power connector

power light

location
purpose

power switch

Power-On Self Test

conducting
interpreting results

R

rack mount

kit
use of

requirements, hardware and software

RJ-45 port. See UTP port

S

Security profile

Default
Full Access
using NavisConnect to configure
using VT100 interface to configure

self-test, conducting

Simple Network Management Protocol (SNMP)

assigning password by using VT100 interface
enabling and assigning passwords by using NavisConnect
passwords defined

SNMP. See Simple Network Management Protocol

software configuration

MAX 800 security

status lights. See lights

straight-through cable

T

Telnet password

setting by NavisConnect
setting by VT100 interface

thick Ethernet. See 10Base-5 Ethernet

troubleshooting

twisted-pair Ethernet. See 10Base-T Ethernet

U

unshielded twisted-pair (UTP). See UTP port

UTP port

cable and connectors required
location on MAX 800
purpose
usage

V

VT100 interface

hardware and software requirements
using to configure MAX 800 security

W

WAN access switch

defined

World Wide Web

Ascend's approved modem list

techpubs@ascend.com

Copyright © 1998, Ascend Communications, Inc. All rights reserved.