Configuration and Administration Guide

Introduction

• About This Guide
• PortServer TS 8/16 Configuration Overview
• Digi One RealPort and PortServer TS 2/4 Configuration Overview
• Logging on as the Administrator
• Setting Up a Configuration Terminal
• Configuring a Digi Device from a Telnet Session

Configuring the Ethernet Interface

• Assigning an IP Address from the Command Line
• Assigning an IP Address with DHCP
• Configuring an IP Address with RARP
• Configuring a Default Gateway

Configuring RealPort Connections

• Configuring RealPort Connections: An Introduction
• Configuring RealPort 

Configuring Printer Connections

• Configuration Considerations
• Configuring Printer Connections
• Configuring a Port for Direct Access Printing

Configuring Terminal and Computer Connections

• Configuring Terminal and PC Connections: An Introduction
• Configuring Terminal Connections
• About Computer Connections

Configuring Modem Connections

• Tips on Configuring Your Modem
• Configuring Incoming-Only Modem Connections
• Configuring Two-Way and Outbound Modem Connections

Configuring Users

• About Configuring Users
• Configuring a User for Autoconnection
• Restricting a User

Configuring the SNMP Agent

• About SNMP and the SNMP Agent
• Configuring SNMP

Configuring Security Features

• Controlling Access to the Configuration
• Controlling Access to Inbound Ports
• Controlling Access to Outbound Ports
• Controlling Access to the Command Line
• Using RADIUS to Authenticate Users

Configuring Autoconnection

• About Autoconnection Methods
• Configuring Autoconnection By Port
• Configuring a User for Autoconnection

Configuring DNS

• About the Domain Name System
• Procedure for Using a Host File
• Procedure for Using a Name Server

Managing the OS and Configuration

• Upgrading the OS (Firmware)
• Copying the Configuration File to a Host
• Copying a Configuration File from a Host to a Digi Device
• Resetting the PortServer TS 8/16 Configuration to Defaults
• Resetting the Digi One RealPort and PortServer TS 2/4 Configuration to Defaults

Configuration Examples

• Configuration Examples: An Introduction
• Terminal Server Configuration Using RealPort
• Terminal Server Configuration Without RealPort
• Terminal Server Configuration Using Autoconnection

Key Commands

• newpass
• set auth
• set config
• set flow
• set line
• set ports
• set radius
• set users

Index

• Index

Copyright © 2001, Digi International. All rights reserved.