About This Guide

How to use this guide

This guide explains how to install and test the MAX 6000 series (referred to as the MAX) hardware. It also explains how to navigate the user interface. When you finish with the instructions in this guide, you will be ready to configure the MAX.

Following is a chapter-by-chapter description of the topics in this guide:

"Chapter 1, Getting Acquainted with the MAX, describes the main features of the MAX and provides a list of package contents.
"Chapter 2, Setting Up and Testing the MAX Hardware, explains how to install and test the MAX hardware.
Chapter 3, Quickstart, explains how to perform a basic configuration of your MAX.
Chapter 4, Navigating and Securing the Interface, tells you how to navigate the MAX user interfaces.
Appendix A, Provisioning the Switch, gives you information that your T1, E1, or BRI service provider needs to properly provision the Central Office switch.
Appendix B, MAX Technical Specifications, lists the technical specifications of the MAX and the pin assignments for each interface.
Appendix C, Cables and Connectors, describes specifications for different facets of the MAX, and discusses cabling requirements.
Appendix D, FCC and Canadian Notices, shows the FCC and Canadian Notices and Warnings.
Appendix E, Warranties, provides the warranty terms.

The guide also includes an index.

What you should know

This guide is for the person who configures and maintains the MAX. To configure the MAX, you need to understand the following:

Wide area network (WAN) concepts
Local area network (LAN) concepts, if applicable

Documentation conventions

Following are all the special characters and typographical conventions used in this manual:


Convention	Meaning
`Monospace text`	Represents text that appears on your computer's screen, or that could appear on your computer's screen.
Boldface mono-space text	Represents characters that you enter exactly as shown (unless the characters are also in italics-see Italics, below). If you could enter the characters but are not specifically instructed to, they do not appear in boldface.
Italics	Represent variable information. Do not enter the words themselves in the command. Enter the information they represent. In ordinary text, italics are used for titles of publications, for some terms that would otherwise be in quotation marks, and to show emphasis.
[ ]	Square brackets indicate an optional argument you might add to a command. To include such an argument, type only the information inside the brackets. Do not type the brackets unless they appear in bold type.
\|	Separates command choices that are mutually exclusive.
>	Points to the next level in the path to a parameter or menu item. The item that follows the angle bracket is one of the options that appears when you select the item that precedes the angle bracket.
Key1-Key2	Represents a combination keystroke. To enter a combination keystroke, press the first key and hold it down while you press one or more other keys. Release all the keys at the same time. (For example, Ctrl-H means hold down the Control key and press the H key.)
Press Enter	Means press the Enter, or Return, key or its equivalent on your computer.
Note:	Introduces important additional information.
Caution:	Warns that a failure to follow the recommended procedure could result in loss of data or damage to equipment.
Warning:	Warns that a failure to take appropriate safety precautions could result in physical injury.

Note: In a menu-item path, include a space before and after each ">" character.

MAX 6000 Series documentation set

The MAX 6000 Series documentation set consists of the following manuals:

MAX 6000 Series Administration Guide
MAX 6000 Series Hardware Installation Guide
MAX 6000 Network Configuration Guide
MAX Reference Guide
MAX Security Supplement
MAX RADIUS Configuration Guide
MAX Glossary

Related publications

This guide and documentation set do not provide a detailed explanation of products, architectures, or standards developed by other companies or organizations. Following are some publications that you may find useful:

The Guide to T1 Networking, William A. Flanagan
Data Link Protocols, Uyless Black
The Basic Book of ISDN, Motorola University Press
ISDN, Gary C. Kessler
TCP/IP Illustrated, W. Richard Stevens
Firewalls and Internet Security, William R. Cheswick and Steven M. Bellovin

techpubs@ascend.com

About This Guide

How to use this guide

What you should know

Documentation conventions

Convention

Meaning

MAX 6000 Series documentation set

Related publications